This text is replaced by the Flash movie.

 
CTL60
CTL70
CTL80
ENGINE      
Make/Model Yanmar/4TNV98(1) Isuzu/4JG1T Yanmar/4TNV106T
Aspiration Natural Turbocharged Turbocharged
Displacement (L) /Cylinders 202.5 cu in (3.3) / 4 187 cu. in. (3.1) / 4 269cu. in. (4.4) / 4
Horsepower (kW) @ rpm 66 hp (49) @ 2450 81 hp (60) @ 2400 97 hp (72) @ 2200
Max. Torque (Nm) @ rpm 181 ft-lbs (244) @ 1600 190 ft-lbs (258) @ 1800 291 ft-lbs. (393) @1400

PERFORMANCE
     
Tipping Capacity - SAE J732 (kg) 4630 lbs (2100) 5952 lbs (2700) 7056 lbs (3200)
Rated Operating Load (kg)      
    SAE J818 @ 35% of tipping capacity 1620lbs (735) 2083 lbs (945) 2470 lbs (1120)
    SAE J818 @ 50% of tipping capacity 2315 lbs (1050) 2976 lbs (1350) 3528 lbs(1600)
Breakout Force (kN)      
    Bucket 6728 lbs (30.0) 7401 lbs (32.9) 8692 lbs (38.6)
    Lift Arm 6709 lbs (29.8) 7425 lbs (33) 8549 lbs (38.0)

ELECTRICAL
     
Battery / CCA 12 volt / 660 12 volt / 660 12 volt / 660
Alternator 40 amp 50 amp 60 amp

UNDERCARRIAGE
     
Traction Pump / Traction Drive Piston / Planetary Piston / Planetary Piston / Planetary
Traction Braking Hydraulic Hydraulic Hydraulic
Drawbar Pull (kN) 8,812 lbs (39.2) 11,244 lbs (50) 13,066 lbs (58.1)
Roller Type / Track Rollers - each side Steel / 5 Steel / 5 Steel / 6
Track Width 12.6" (320) 18.0" (457) 18.0" (457)
Track Contact Length 54.7" (1389) 59.0" (1496) 62.9" (1598)
Ground Pressure (kg/cm2) 4.86 psi (0.34) 4.1 psi (0.28) 4.3 psi (0.30)
Travel Speed (km/h)      
    Low 0-4.5 mph (0-7.2) 0-4.5 mph (0-7.2) 0-5.0 mph (0-8)
    High 0-6.3 mph (0-10.1) 0-6.4 mph (0-10.3) 0-6.9 mph (0-11)

HYDRAULIC SYSTEM
     
Operating Pressure (bar) 2988 psi (206) 2988 psi (206) 2988 psi (206)
Auxiliary Hydraulic Flow (L/min) 18.0 gpm (68.1) 19.8 gpm (74.9) 23.4 gpm (88.6)
Auxiliary Hydraulic Pressure (bar) 2988 psi (206)   2988 psi (206)
CAPACITIES      
Fuel (L) 19.8 gal (75) 23.8 gal (90.1) 28.5 gal (107.9)
Hydraulic (L) 10.6 gal (40.1) 10.8 gal (40.8) 16.9 gal (64)
Engine Oil (L) 10.8 qt (10.2) 10.0 qts (9.4) 14.8 qt (14)
Engine Coolant (L) 11.6 qt (11) 16.0 qts (15.1) 16.0 qt (15.1)

DIMENSIONS & WEIGHT
     
Operating Weight (kg) - approx. 7497 lbs (3401) 9590 lbs (4350) 10,692 lbs (4850)
A. Max. Lift height to Bucket Pin (mm) 119.5" (3035) 123.0 (3124) 126.1 (3203)
B. Dump Height (mm) 93.3" (2370) 94.8 (2408) 93.5" (2375)
C. Reach @ Maximum Lift (mm) 33.5" (851) 34.4 (874) 41.0 (1049)
D. Dump Angle 37° 38.5° 37°
E. Bucket Roll Back @ Ground Level 35° 31° 32°
F. Length - w/o bucket (mm) 103.5" (2629) 116.1 (2949) 122.3 (3106)
G. Length - w/bucket (mm) 139.5" (3315) 146.0 (3708) 158.5" (4026)
H. Ground Clearance (mm) 12.2" (310) 12.8 (325) 14.3" (363)
I. Angle of Departure 26° 29.2° 28°
J. Height - to top of ROPS 87.8 (2235) 89.1 (2263) 91.1 (2314)
K. Width - w/o bucket (mm) 62.2" (1580) 69.7" (1770) 72.6" (1884)
L. Overall Width - w/bucket 70 (1778) 74 (1880) 84 (2134)
M. Rear Clearance Radius (mm) 61.0" (1549) 65.6 (1666) 71.5" (1816)
N. Front Clearance Radius - w/bucket 93.0" (2362) 90.3 (2294) 106.0" (2692)

BUCKET
     
Mounting Universal quick-attach Universal quick-attach Universal quick-attach
Capacity - SAE Heaped (m3) 15.3 cu. ft. (0.44) 20.4 cu. ft. (0.58) 22.0 cu. ft. (0.63)

(1) Engine in effect in 2004.

All dimensions are in inches (millimeters) unless otherwise noted.